Are you talented in working with your hands? Do you love the beauty of wood crafts and furniture? If so, you may be able to make a living working at making beautiful items from wood. Use the information provided in this article to decide if woodworking could be the best career choice for you.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
Always put your safety first when it comes to using tools, stains and paints. The more variety you use, the more specifics there are about applications, tool use, times for drying, and more. Put your safety first by reading the instructions, wearing any necessary protective gear, and working in areas with good ventilation whenever using oil-based products or anything that produces air pollutants.
Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
Always keep your work area clean and safe, even when you are not actually there. Leaving out pieces of lumber with nails in them or even power tools that are easily activated in your yard can be dangerous. You never know when animals or even neighborhood children might come romping through and hurt themselves.
Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16′ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2’³ intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.
Furniture and craft items made with solid wood, and finished to perfection are worth a lot. This is because the quality is so much better than items produced in a factory. With all the information in this article, you should be able to decide if working with wood is the best path for you.